The brief introduction of the hammer crusher
The brief introduction of the hammer crusher
Hammer crusher is a kind of equipment which can be used to crush materials by its high-speed rotary hammers. It is closely connected to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics.
The hammer crusher can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds. The characters of hammer crusher are high capacity, high crushing ratio, uniform particle size, simple structure, low investment, easy management and maintenance.
Hammer crusher is mainly made of frame, rotor, support iron and grate bars. The frame consists of upper part and lower part. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turnplate, pin shafts, and hammers which are grouped regularly in the main shaft. The motors drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.
Hammer crusher is a kind of equipment which can be used to crush materials by its high-speed rotary hammers. It is closely connected to the industries of metallurgy, mining, chemistry, cement, construction, refractory materials and ceramics.
The hammer crusher can crush hard and soft ores into medium or small size, such as barite, limestone, gypsum, terrazzo, coal, slag, and up to 100 different kinds. The characters of hammer crusher are high capacity, high crushing ratio, uniform particle size, simple structure, low investment, easy management and maintenance.
Hammer crusher is mainly made of frame, rotor, support iron and grate bars. The frame consists of upper part and lower part. Liners made of high manganese steels within the frame can be replaced after being worn out. The rotors consist of the turnplate, pin shafts, and hammers which are grouped regularly in the main shaft. The motors drives the rotors to rotate quickly in the crushing cavity, and hammers spread outward as a result of centrifugal force from the rotation of the rotors. Large materials entering the crusher through the feed inlet are stricken, impacted, cut and ground by the high-speed hammers to small size. Qualified materials crushed will be screened out and exit from the gap of the grate bars while the unqualified will be left in the crushing cavity to be further hammered and ground until reach the standard size. The size of final product can be adjusted by changing the grate bars. The gap between the rotors and the grate bars can also be adjusted according to different requirement.